Reference Manual
24
3.5.2
Video / Audio
In the
Video / Audio
tab the video and audio decoders of the Targa Receiver
are configured.
The following table gives an overview of the available video settings:
Setting
Description
Default
Video Mode
Set this to the resolution of the incoming
video stream.
1090x1080
Display Timing
This setting determines the display timing
of the HDMI and SDI video outputs. The
framerate has to match the incoming
video stream. The receiver will
automatically upscale SD video to the
desired output resolution.
1080p25
Video Port
UDP port on which incoming video will be
received.
5004
The next table sums up all audio playback related settings:
Setting
Description
Default
Enable Audio
Playback
If enabled, play back received audio on all
outputs (HDMI, SDI and analog output).
Enabled
Audio Port
UDP port on which the incoming audio
will be received
5008
The next table shows the available audio recording settings. This allows the
receiver to transmit an AAC encoded audio stream. To use this feature to
stream to a Targa Transmitter which is connected over LTE, you will have to
connect the transmitter with the receiver using a VPN tunnel. This has to be
done, because the LTE stick cannot be directly reached from the internet (this
is a security feature). For more information on setting up a VPN connection
see chapter 3.3.2.
Setting
Description
Default
Enable Audio
If enabled streams an elementary audio
Disabled
