41
II-3-6 AP Discovery
VigorAP 802 can scan all regulatory channels and find working APs in the neighborhood. Based on
the scanning result, users will know which channel is clean for usage. Also, it can be used to
facilitate finding an AP for a WDS link. Notice that during the scanning process (about 5 seconds), no
client is allowed to connect to VigorAP.
This page is used to scan the existence of the APs on the wireless LAN. Please click
Scan
to discover
all the connected APs.
Each item is explained as follows:
Item Description
SSID
Display the SSID of the AP scanned by VigorAP 802.
BSSID
Display the MAC address of the AP scanned by VigorAP 802.
RSSI
Display the signal strength of the access point. RSSI is the abbreviation
of Received Signal Strength Indication.
Channel
Display the wireless channel used for the AP that is scanned by
VigorAP 802.
Encryption
Display the encryption mode for the scanned AP.
Authentication
Display the authentication type that the scanned AP applied.
Mode
Display the wireless connection mode that the scanned AP used.
Ch. Width
Display the channel width that the scanned AP used.
Scan
It is used to discover all the connected AP. The results will be shown
on the box above this button
Summary of Contents for VigorAP 802
