Draytek Vigor3300 Series User Manual Download

Page: 116 / 213

Vigor3300 Series User’s Guide

110

For Default Configuration

To edit or add a policy, please click one of the radio buttons and click

Edit

. The

following page of default configuration will be shown:

Profile Status

Set the initialization of IPSec Tunnel with this profile.

Enable

– Choose this one to active this profile.

Disable

– Choose this one to inactivate this profile.

Name

The name for VPN connection (ex. “VPN1”). The maximum

length of name is 20 characters including spaces.

Authentication

The authentication to be used by PreShared Key or RSA

Signature.

PreShared Key

The shared key for peer identification. The maximum length is

40 characters, including spaces.

Security Protocol

AH -

Specify the IPSec protocol for the Authentication Header

protocol. The data will be authenticated but not be encrypted.

ESP -

Specify the IPSec protocol for the Encapsulating Security

Payload protocol. The data will be encrypted and authenticated.

Summary of Contents for Vigor3300 Series






















































































































































































































Search results

Summary of Contents for Vigor3300 Series

Reviews:

Related manuals for Vigor3300 Series

Brands by name

Popular brands

Draytek Vigor3300 Series, User Manual

Search results

Summary of Contents for Vigor3300 Series

Reviews:

Related manuals for Vigor3300 Series

Brands by name

Popular brands