Draytek Vigor3300 Series, User Manual

Page: 45 / 213

Vigor3300 Series User’s Guide
39
Load Balance Enables or disables the WAN load balance function. The Auto Weight
option becomes available if Enable mode is selected. Load Balance
allows the router distributing data in and out of the Internet by using
different WAN interfaces at the same time.
Backup Enables or disables backup function for WAN interfaces. If you enable
this function, the backup-master/backup-slave will execute the job of
master/slave device when the master/slave device fails to work.
Edit Open the configuration page of this WAN interface.
IP Mode Display current mode of this WAN interface. There are five options:
Static, DHCP, PPPoE, PPTP and DHCP.
Active Activates/closes this WAN interface.
Default Route Set this WAN interface as default route interface.
Load Balance Adds this WAN interface to the load balance group.
Weight Set the weight load (10-90%) for this WAN interface for load balance.
This selection is available only when Auto Weight is unchecked.
Backup-Master Set this WAN interface as a master interface. WAN1 must be assigned as
Master interface if Backup function is enabled.
Backup-Slave Set this WAN interface as a slave interface.
VoIP Set this WAN interface as VoIP default interface.
Most users will use their routers primarily for Internet access. The Vigor3300 Series supports
broadband Internet access and provides multiple WAN interfaces. The following sections will
give a detailed illustration to broadband access methods.
Click the “ Edit ” icon to bring up the WAN configuration page for the corresponding interface.