Draytek Vigor2900 Series Security Router, User Manual

Page: 14 / 173

Vigor2900 Series User’s Guide 8
1 1 . . 1 1 . . 7 7 F F r r o o n n t t a a n n d d R R e e a a r r V V i i e e w w f f o o r r V V i i g g o o r r 2 2 9 9 0 0 0 0 V V G G i i
LED Status Explanation
ACT (Activity) Blinking The router is powered on and running properly.
On The ISDN network is correctly setup. ISDN
Blinking A successful remote connection on the ISDN BRI
B1/B2 channel.
On The phone is off hook (the handset of phone is
hanging).
Phone
(FXS1, FXS2)
Blinking A phone call is incoming.
On The wireless LAN function is enabled. WLAN
Blinking Ethernet packets are transmitting over wireless LAN.
Printer On The USB interface printer is ready.
Orange A normal 10Mbps WAN link is ready.
Green A normal 100Mbps WAN link is ready.
WAN
Blinking Ethernet packets are transmitting.
Orange A normal 10Mbps connection is through its
corresponding port.
Green A normal 100Mbps connection is through its
corresponding port.
LAN (1, 2, 3, 4)
Blinking Ethernet packets are transmitting.
Interface Description
Printer Connecter for a USB printer.
PWR Connecter for a power adapter.
0/1 Power Switch.
FXS 2 - 1 Connecter of analog phone for VoIP communication.
P1 – P4 Connecter for local networked devices.
WAN Connecter for remote networked devices.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.