Draytek Vigor2710 Series User Manual Download

Page: 154 / 335

Vigor2710 Series User’s Guide

142

To edit

Filter Rule

, click the

Filter Rule

index button to enter the

Filter Rule

setup page.

Check to enable the
Filter Rule

Check this box to enable the filter rule.

Comments

Enter filter set comments/description. Maximum length is 14-
character long.

Index(1-15)

Set PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules
pre-defined in

Applications >> Schedule

setup. The default

setting of this filed is blank and the function will always work.

Direction

Set the direction of packet flow (LAN->WAN/WAN->LAN).
It is for

Data Filter

only. For the

Call Filter

, this setting is not

available since

Call Filter

is only applied to outgoing traffic.

Source/Destination IP

Click

Edit

to access into the following dialog to choose the

source/destination IP or IP ranges.

Summary of Contents for Vigor2710 Series
















































































































































































































































































































































Search results

Summary of Contents for Vigor2710 Series

Reviews:

Related manuals for Vigor2710 Series

Brands by name

Popular brands

Draytek Vigor2710 Series, User Manual

Search results

Summary of Contents for Vigor2710 Series

Reviews:

Related manuals for Vigor2710 Series

Brands by name

Popular brands