Draytek Vigor IPPBX 2820n User Manual Download

Page: 354 / 378

VigorIPPBX 2820 Series User’s Guide

346

Enable E-mail Alert

Check the box to send alert message to the e-mail box
while the modem detecting the item(s) you specify here.

Click

to save these settings.

For viewing the Syslog, please do the following:

Just set your monitor PC’s IP address in the field of Server IP Address

Install the Router Tools in the

Utility

within provided CD. After installation, click on

the

Router Tools>>Syslog

from program menu.

From the Syslog screen, select the router you want to monitor. Be reminded that in

Network Information

, select the network adapter used to connect to the router.

Otherwise, you won’t succeed in retrieving information from the router.

Summary of Contents for Vigor IPPBX 2820n



























































































































































































































































































































































































Search results

Summary of Contents for Vigor IPPBX 2820n

Reviews:

Related manuals for Vigor IPPBX 2820n

Brands by name

Popular brands

Draytek Vigor IPPBX 2820n, User Manual

Search results

Summary of Contents for Vigor IPPBX 2820n

Reviews:

Related manuals for Vigor IPPBX 2820n

Brands by name

Popular brands