Draytek Vigor IPPBX 2820n User Manual Download Page 216

Page: 216 / 378

VigorIPPBX 2820 Series User’s Guide

208

Such mode is active only

3G USB Modem

was chosen as the physical mode in General

Setup.

PPP Client Mode

Click Enable to activate this mode for WAN2.

SIM PIN code

Type PIN code of the SIM card that will be used to access
Internet.

Modem Initial String

Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to your
ISP.

APN Name

APN(Access Point Name) is provided by your ISP for
identifying different access points. Simply click

Apply

apply such name. Finally, you have to click

to save the

setting.

Apply

– Activate the function of identification.

Modem Dial String

Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your
ISP.

PPP Username

Type the PPP username (optional).

PPP Password

Type the PPP password (optional).

Index (1-15)

Set the PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules
pre-defined in

Applications >> Schedule

setup. The default

setting of this filed is blank and the function will always work.

Summary of Contents for Vigor IPPBX 2820n



























































































































































































































































































































































































Search results

Summary of Contents for Vigor IPPBX 2820n

Reviews:

Related manuals for Vigor IPPBX 2820n

Brands by name

Popular brands

Draytek Vigor IPPBX 2820n, User Manual

Search results

Summary of Contents for Vigor IPPBX 2820n

Reviews:

Related manuals for Vigor IPPBX 2820n

Brands by name

Popular brands