5.1 GENERAL SAFETY INSTRUCTIONS
General Power Tools Safety Warnings
WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1) Work area safety
a)
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c)
Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
2) Electrical Safety
a)
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electrical shock.
b)
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c)
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d)
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f)
If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal Safety
a)
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
b)
Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c)
Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have the
switch on invites accidents.
d)
Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
e)
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f)
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
g)
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust
related hazards.
4) Power Tool Use and Care
a)
Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tools operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc., in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from intended could result in a
hazardous situation.
5) Battery Tool Use and Care
a.
Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
b.
Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c.
When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the battery terminals together may
cause burns or a fire.
d.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
6) Service
a.
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5.2 ADDITIONAL SAFETY INFORMATION
– Close supervision is necessary when the unit is used by or near children. Do not use as a
toy.
– To protect against risk of electrical shock or fire, do not put unit or charger in water or other
liquid.
– Do not put this unit in a fire or near any flammable object as this may cause explosion.
– Do not drop, throw or use excessive force on the unit as it may cause permanent damage to
the product.
– Do not operate the unit if it has been wet or moist to prevent against electric shock,
explosion and/or injury to yourself and damage to the unit.
– Recharge indoors only, using only the charger supplied.
– Use the charger only in a standard electrical outlet.
– Do not attempt to disassemble the unit as this may cause damage.
– Do not shine directly into eyes.
– Unplug the charger before any routine cleaning or maintenance. Never let any liquid get
inside the unit, use only mild soap and damp cloth to clean outer surfaces of the unit.
– The built-in Li-ion battery must be recycled or disposed of properly, do not expose the
battery to fire or intense heat as it may explode.
– Do not overcharge the unit, recharge not more than 12 continuous hours.
– To assure product safety and reliability, repairs, maintenance and adjustment should be
performed by authorised service centres or other qualified service organisations, always
using identical replacement parts.
Draper Tools Limited, Hursley Road,
Chandler's Ford, Eastleigh, Hampshire. SO53 1YF. U.K.
Helpline: (023) 8049 4344
Sales Desk: (023) 8049 4333
Internet: drapertools.com
E-mail: [email protected]
General Enquiries: (023) 8026 6355
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the
Draper Tools Helpline for details of an agent in your local area.
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions
before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
87737
CONTACTS
YOUR DRAPER STOCKIST
RWCM0219
RECHARGEABLE
WORKLIGHT
4. INTRODUCTION
4.1 SCOPE
10W COB rechargeable twin spot and flood light with swivel stand. Supplied with Micro USB to
USB cable for charging the worklight and power take off for charging mobile devices.
4.2 SPECIFICATION
Stock no.................................................................................................................................... 87737
Part no.................................................................................................................................. RFL/750
LED ....................................................................................................................................10W COB
Battery:
Type .................................................................................................................................. Li-ion
Rated Voltage .................................................................................................................... 3.7V
Rating .............................................................................................................................. 4.4Ah
Charging time ................................................................................................................... 5 hrs
Operating time............................................................................................................................ 5 hrs
Luminosity ....................................................................................................................... 750 lumens
Dimensions............................................................................................................... 230x200x56mm
Weight (spotlight only) ............................................................................................................... 577g
4.3 HANDLING AND STORAGE
Do not drop the worklight as this can damage and shorten the life span of the unit.
Store in a dry location as damp conditions can damage the worklight.
Charging on a regular basis is advised to prolong the life of the battery cells.
5. HEALTH AND SAFETY INFORMATION
1.
TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR:
Rechar
geab
le W
orklight
Stock No:
87737
Par
t No: RFL/750
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are a
vailab
le from:
http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website:
drapertools.com
Product Helpline:
+44 (0) 23 8049 4344
General Fax:
+44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING!
– Information that draws attention to the risk of injury or death.
CAUTION!
– Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
1.2 REVISIONS:
Date first pub
lished March 2019
.
2. CONTENTS
1.
TITLE PAGE
1.1 INTRODUCTION
..........................................................................................................2
1.2 REVISION HIST
ORY
..................................................................................................
2
1.3 UNDERST
ANDING THIS MANUAL
.............................................................................2
1.4 COPYRIGHT
NOTICE..................................................................................................
2
2.
CONTENTS
2.1 CONTENTS....................................................................................................................
3
3.
GUARANTEE
3.1 GUARANTEE
...............................................................................................................4
4.
INTRODUCTION
4.1 SCOPE
.........................................................................................................................4
4.2 SPECIFICA
TION..........................................................................................................
4
4.3
HANDLING AND ST
ORAGE........................................................................................
4
5.
HEALTH AND SAFETY INFORMA
TION
5.1
GENERAL SAFETY
INSTRUCTIONS......................................................................
4-5
– 1) W
ork area safety
..................................................................................................5
– 2) Electrical Safety
..................................................................................................5
– 3) Per
sonal Safety
...................................................................................................5
– 4) Power
Tool Use and Care
....................................................................................5
– 5) Battery tool Use and Care
..................................................................................5
– 6) Service
.................................................................................................................5
5.2
ADDITIONAL SAFETY
INFORMATION
.......................................................................5
6.
TECHNICAL DESCRIPTION
6.1
IDENTIFICATION
.........................................................................................................6
7.
UNPACKING AND CHECKING
7.1 P
ACKAGING................................................................................................................
6
7.2
WHAT´S IN
THE BOX?................................................................................................
6
8.
ASSEMBLING THE W
ORKLIGHT
8.1
POWER SUPPLY
.........................................................................................................7
8.2 CHARGING
..................................................................................................................7
9.
WORKLIGHT INSTR
UCTION
9.1 OPERA
TION................................................................................................................
8
9.2
WORKLIGHT OPERA
TION..........................................................................................
8
9.3
USB POWER TAKE OFF
.............................................................................................8
9.4
BATTER
Y INDICA
TOR
.................................................................................................8
10. MAINTENANCE
10.1 MAINTENANCE
...........................................................................................................8
11. EXPLANA
TION OF SYMBOLS
11.1
EXPLANATION OF SYMBOLS
....................................................................................9
12. DISPOSAL
12.1 DISPOSAL
....................................................................................................................9
12.2 HEAL
TH AND SAFETY
FOR BATTERIES
...................................................................9
DECLARATION OF CONFORMITY
..............................................................................ENCLOSED
- 3 -
3. GUARANTEE
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or:
Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
- 4 -
5. HEALTH AND SAFETY INFORMATION
- 5 -
