11. EXPLANATION OF SYMBOLS
11.1 EXPLANATION OF SYMBOLS
12. DISPOSAL
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION
- 6 -
- 7 -
9. WORKLIGHT INSTRUCTION
9.1 OPERATION
CAUTION: Never shine the LED light directly into your or any one else’s eyes.
Press the on/off
(3)
button.
9.3 USB POWER TAKE OFF
Connect the USB end of the power cord into the USB output port
(7)
beneath the cover,
and connect the Micro USB end to your mobile device for charging.
9.4 BATTERY INDICATOR
Press the battery indicator button
(4)
. The battery indicator LEDs will illuminate to advise length
of battery charge.
- 8 -
- 9 -
Warning: Do not connect the machine to the power supply before the product is completely
assembled.
8.1 CHARGING
NOTE: The micro USB connector is tapered and will only go in one way, do not force the
micro USB connector into the lamp; as it may damage the connector or short circuit the
lamp, this may invalidate your guarantee.
Connect the charging micro USB cable
into the charging input
(6)
, which is located under the
cover at the end of the worklight. Connect the other USB A plug to a USB output adaptor
(not supplied). The red LED charging indicator will illuminate to indicate charging, and the green
LED will be on when the battery is fully charged.
Disconnect the charger from the worklight when it is fully charged.
Lithium-ion cells prefer small charges often.
Lithium-ion technology is lightweight and compact due to increased capacity in comparison to
other battery chemistries.
Lithium-ion cells have no ‘memory effect’ and a long cycle life with outstanding discharge
performance.
Lithium-ion cells suffer from a loss in capacity or thermal runaway if over charged and will degrade
if allowed to enter deep discharge, however all of these situations are negated due to the complex
circuitry incorporated within this product.
Charging must be carried out in an environment with an ambient air temperature between 5°C to
45°C with the transformer supplied.
Note: Charging the unit with the 12V DC charger via a vehicle socket will drain the vehicle’s
battery unless the engine is running.
9.2 WORKLIGHT OPERATION
The worklight is operated via the ON/OFF switch
(3)
.
Fully press once for power on.
Half press twice for flood light.
Half press third time for spot light.
Press firmly to switch off the worklight.
Warning! Do not shine directly into any person’s or animal’s eyes.
1
2
3
4
10. MAINTENANCE
10.1 MAINTENANCE
Use only mild soap and a damp cloth to clean this worklight. Do not submerge into liquid.
Lithium-ion product.
Refer to your local authority for
advice on disposal and recycling.
For indoor use only.
Do not expose to rain.
WEEE
Do not dispose of Waste Electrical &
Electronic Equipment in with domestic
rubbish.
Warning! Read the instruction
manual.
Do not incinerate or throw onto
fire.
Warning! Do not aim beam at
bystanders or look directly into
light source.
12.1 DISPOSAL
At the end of the machine’s working life, or when it can no longer be repaired, ensure that it
is disposed of according to national regulations.
Contact your local authority for details of collection schemes in your area.
In all circumstances:
– Do not dispose of power tools with domestic waste.
– Do not incinerate.
– Do not abandon in the environment.
– Do not dispose of WEEE* as unsorted municipal waste.
12.2 HEALTH AND SAFETY FOR BATTERIES
Warning! Do not put in fire or mutilate – cells may burst of release toxic materials.
– Do not short circuit cells, may cause burns.
– The battery must be removed from the appliance before it is scrapped.
– The battery is to be disposed of safely.
– Do not mutilate batteries, corrosive electrolyte will be released.
– Do not incinerate – danger of explosion and release of toxic fumes.
– Do not dispose of batteries or cells in a charged condition.
Expired lithium-ion batteries must be recycled/disposed of in accordance with the
appropriate regulation or legislation. They should be returned to your local warranty
agent/stockist.
* Waste Electrical & Electronic Equipment.
7. UNPACKING AND CHECKING
7.1 PACKAGING
Carefully remove the worklight from the packaging and examine it for any sign of damage that may
have happened during shipping. If any part is damaged or missing; please contact the Draper
Helpline (the telephone number appears on the Title page) and do not attempt to use the lamp.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of correctly; according
to local regulations.
7.2 WHAT´S IN THE BOX?
As well as the worklight; there are separate parts not fitted or attached to it.
8. ASSEMBLING THE WORKLIGHT
8.1 POWER SUPPLY
Before you connect the equipment to the power supply make sure that the data on the rating plate
is identical to the supply voltage.
Warning! Always pull out the power plug before making adjustments to the equipment.
(8)
Micro USB
charging cable.
(8)
(1)
(3)
(4)
(5)
(6)
(7)
(2)
(1)
Spot light.
(2)
Flood light.
(3)
On/Off button.
(4)
Battery indicator button.
(5)
Battery indicator LEDs.
(6)
Micro USB charging input.
(7)
USB power take off.
(3)
(6)
1
2
4
3
