23
937.746.4556 |
www.rldrake.com
New Password:
used only if the user wants to change the current Administrator’s password. Must enter a new
password (10 characters maximum). Password is case sensitive and will not be displayed.
Confirm New Password:
user must enter the same password as entered in above. If password entered in
& does not match, an error will be displayed.
Guest Login:
is the Guest login (10 characters maximum). This login allows the user to view the unit settings but
does not allow any changes. Login is case sensitive. (Factory Default: "Guest")
Current Guest Password:
is the Current Guest Password (10 characters maximum). Password is case sensitive
and will not be displayed. (Factory Default: "pass")
New Guest Password:
used only if the user wants to change the current Guest password. User must enter a new
password (10 characters maximum). Password is case sensitive and will not be displayed.
Confirm Guest Password:
user must enter the same password as entered in above. If password entered in
& does not match, an error will be displayed.
Save Configuration Settings:
allows the user to download and save the existing configuration of the unit in a .dat
file format.
Default Unit Settings:
Returns all "Main" tabs (with the exception of the "QAM" Tab) to the original settings as
shipped from the factory.
Load Settings from File:
Not recommended for basic users. Please consult the factory regarding this function.
Choose File:
allows the user to select the desired Config file from any location on the computer to be uploaded to the unit.
Load & Apply Configuration Settings:
allows the user to upload a newly created file or update an existing file.
Software/Firmware Update:
Click "Choose File" to select the firmware update file to be applied by "Update
Firmware/Software". When update is initiated, an update screen will appear and will display time remaining to
complete update. When update is complete, unit will automatically reboot and return to admin screen.
Restore Previous Firmware Version:
returns the encoder to the last installed firmware version before the current update.
System Watchdog:
options are “Enabled” and “Disabled”. When Enabled, automatically reboots the unit if the
operating system stops working. (Factory Default: "Disabled")
System Reboot:
allows the user to reboot the unit.
Ethernet IP Address:
the static IP address that is assigned to the unit. It allows the user to access the unit via the
web interface and also receive IP output. (Factory Default: "172.16.70.1")
Ethernet Subnet Mask:
the Subnet Mask address of the unit. It allows the user to access the unit from another
network via the web interface. (Factory Default: "255.255.255.0")
Ethernet Default Gateway:
the gateway address of the unit. It allows the user to access the unit from another
network via the web interface. (Factory Default: "172.16.70.254")
Event Log Destination:
the IP address of the remote server, to which Syslog sends the activities recorded by the unit
for monitoring and troubleshooting purposes. (Factory Default: "172.16.70.2")
Log Destination Port #:
the Error Log Destination port to which a duplicate of the error messages created by the
unit can be forwarded for monitoring and troubleshooting purposes. (Unmodifiable Factory Default: "514")
Admin Tab
Admin Tab Screen
(continued)
5
3
6
4
7
8
9
10
11
12
13
14
15
16
17
18
19
Remember to click on the SAVE button to apply the new values/configurations.
3
7
4
8
3
7
