20
937.746.4556 |
www.rldrake.com
In the section
entitled "
TS"
under the orange header, the following parameters about the TS are displayed:
TS Mapping:
indicates the program assigned to the TS. The program information includes the PMT PID, Program
number, Short Name, Major-minor channel number. For example, under TS [100 (1) (Test) (3-1)] the following
information is displayed:
100 - indicates the Program MAP Table (PMT) of the program.
1 - indicates the Program number as assigned in of the "Main Tab: TS Config" section.
Test - indicates the Short Name as assigned in of the "Main Tab: TS Config" section.
3-1 - indicates the Major - minor channel number as assigned in and of the "Main Tab: TS Config" section.
101 V: Component - indicates that the input video source is Component and the elementary stream PID is 101.
102 A: Analog - indicates that the input audio source is Analog and the elementary stream PID is 102.
Bitrates:
indicates the assigned transport stream bitrate (see of the "Main Tab: Video" section for details) and the
TS Bitrate (see of the "Main Tab: TS Config" section for details).
In the section entitled
"Output"
under blue header, the following parameters about the output TS are displayed:
IP:
displays the IP address, and the port number to which TS is assigned (see of the "Main Tab: IP" section for
details). To disable the IP output, select "None".
QAM:
displays the QAM RF channel number of the QAM output (see of the "Main Tab: QAM" section for details).
Unit Configuration
1
2
7
8
9
2
2
1
1
10
3
4
Figure 8 - Main Tab: Output Screen
Main Tab: Output Screen
The “Main Tab: Output" sub-tab (Figure 8) is a “read and write” screen to assign the TS to desired IP, QAM, and ASI outputs:
Remember to click on the SAVE button to apply the new values/configurations.
1
2
3
4
