8
937.746.4556 |
www.rldrake.com
FRONT PANEL DESCRIPTION
IP Reset:
When pressed for >10 seconds, the IP address of the control port will be enabled to the default factory
IP address (172.16.70.1,
Subnet Mask
255.255.0.0). The login credentials will also be enabled to the default
username
Admin
and password
pass
, which are both case-sensitive.
Note:
The old IP address, login, and password will still be present in the encoder settings. To clear the reset mode simply
reboot the encoder.
Status LED:
indicates the status of input video and audio as follows:
Green
= Both Video and Digital Audio inputs are present.
Red
= Either the Video or Digital Audio is not present, or internal temperature is too high.
Note:
The encoder does not sense analog audio inputs. Therefore, if the Audio is set for Analog, the status indicator will
only be valid for video.
Power LED:
indicates if the unit is receiving power.
Green
= power is detected.
Off
= indicates (i) power is not connected, or (ii) power is connected but the power supply or encoder is
defective. The unit must be sent to the factory for repair for condition (ii).
Front and Rear Panel Operation
1
2
3
1
2
3
FRONT PANEL VIEW:
