12
937.746.4556 |
www.rldrake.com
Unit Configuration
Accessing the Unit via the Web Browser
The user must complete the steps described in "
Installation & Setup
" before proceeding as follows:
1.
Open a web browser on your computer (Chrome, Firefox, and IE7+ are recommended) and enter the following URL
address
(http://172.16.70.1)
. The "Login" Screen (Figure 1) will appear.
2.
Enter the following case-sensitive factory-default Username and Password, and click on the "Submit" button.
NOTE:
When logged in as Admin, the user has read and write permission. Only one Admin can be logged
in at a time. When logged in as Guest, the user has read permission only. Up to four Guests can be logged
in simultaneously.
Username =
Admin
(case-sensitive)
Password =
pass
(case-sensitive)
- OR -
Username =
Guest
(case-sensitive)
Password =
pass
(case-sensitive)
Monitoring and configuration of the unit is achieved via a series of web pages described in following sections. The following
read-only information is displayed in a white “page header”on top of each web page:
ESN:
unit’s Serial number
Headend name:
a user-defined field to make identification easier
Temperature:
temperature of unit’s chipset
Uptime:
time elapsed since last time the unit was turned on
Location:
a user-defined field to make identification easier
As shown in Figure 2, under the white “page header” the following Primary tabs will appear:
• Primary tab
“Main”
(includes sub-tabs: Status, Video, Audio, TS Config, IP, QAM, Output and Refresh.)
• Primary tab
“Network”
(no sub-tabs)
• Primary tab
“Time”
(no sub-tabs)
• Primary tab
“Event Log”
(no sub-tabs)
• Primary tab
"Logout"
(no sub-tabs, used to log out of the unit)
• Primary tab
“Admin”
(no sub-tabs)
Each Primary and sub-tab is described in the subsequent Sections
Figure 1 - Login Screen
