WARNING: Changing the
USB function
setting will prevent the
DragonLink GUI from being able to connect to the transmitter for
configuration purposes. See section
3.3.5
for instructions on how to
change this setting back to the default.
Option Function
Bi-directional
Radio
modem
Passes raw serial data directly to and from the
connected device.
Yes
DragonLink
Mavlink
Encodes non-MavLink telemetry from the aircraft
into a MavLink-compatible telemetry stream for use
with ground stations.
No
GUI config Allows the connected device to configure the
transmitter using the DragonLink GUI
N/A
NOTE: Baud rates do not apply to the USB virtual COM port. As long as
the baud rate is correct on the receiver, and the receiving software
matches that setting, the data will parse successfully.
Enable MavLink decoding:
This setting enables decoding of an incoming MavLink
telemetry stream so that certain sensor values can be passed to external, non-
MavLink devices.
