manualshive.com logo in svg

Dräger D-Vapor, Instructions For Use Manual

Share
Download
Dräger D-Vapor Instructions For Use Manual Download Page 32

Operating concept

32

Instructions for use D-Vapor/D-Vapor 3000

Plug-in adapter DW-2000 with Interlock 2

The DW-2000 plug-in adapter is connected to 
Dräger plug-in connectors. 

For anesthesia workstations with two plug-in 
connectors combined with Interlock 2

The locking bar, which can only be engaged in the 
control dial when in 

0

 position, only allows one 

vaporizer to be used at any one time.

Illustration: left vaporizer blocked, right vaporizer 
operational.

Dräger Auto Exclusion plug-in adapter

The Dräger Auto Exclusion plug-in adapter is 
connected to Dräger Auto Exclusion plug-in 
connectors or to Dräger plug-in connectors.

Anesthesia workstations with Auto Exclusion 
plug-in connectors

Auto Exclusion plug-in connectors are designed 
only for vaporizers with Auto Exclusion plug-in 
adapters and are marked with the following symbol 
on the anesthesia workstation.

005

NOTE

The DW-2000 plug-in adapter is not compatible 
with the Dräger Auto Exclusion plug-in connector.

006

NOTE

The Dräger Auto Exclusion plug-in adapter is com-
patible with the DW-2000 plug-in connector.

Dräger-Vapor ®

Auto Exclusion

Operating Instructions

Summary of Contents for D-Vapor

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands