Dräger Babylog 8000SC, Technical & Service Manual, Page: 75 / 155

Dräger Medical AG & Co. KGaA 6173.3
All rig
ht
s reserved.
Copyright
rese
rved.
_
_P
ri
n
ted
on
_1
8.0
5.0
5
_
GBK
617
33
XXV
01
.fm
73
Replacing Non-Repairable Items
Babylog 8000
Fig. 19: Air-Supply Test Set-Up
• Carry out the measurement with a manometer and a secretion sightglass at the pneumatics outlet.
• Slowly turn the adjusting ring of the air pressure reducer clockwise. The message “no compressed
air” on the LCD disappears.
• Set the pressure reducer to 1.7
-0.1
bar.
• Set the insp. flow adjuster to 30 L/min. The manometer should indicate at least 1.3 bar.
• Disconnect the Babylog 8000/Babylog 8000 plus/Babylog 8000 SC from the air supply and connect it
to the oxygen supply.
• Adjust the following parameters:
Mode = CPAP; PEEP/CPAP adjuster = 0 mbar; insp. flow = 1 L/min.
Fig. 20: O
2
-Supply Test Set-Up
• Carry out the measurement with a manometer and a secretion sightglass at the pneumatics outlet.
• Slowly turn the adjusting ring of the O
2
pressure reducer clockwise. The message “no oxygen” on the
LCD disappears.
D
D