Dräger Babylog 8000SC, Technical & Service Manual, Page: 143 / 155

6173.3 Babylog 8000/8000 plus/8000 SC 12/00 General
Page 11
For
inter
nal use o
n
ly
. Copyr
ight r
e
se
rved.
GBK61733
X
X
T
L1.fm 07.07
.05
10 Calibration / LED / Potentiometer Test
• Assemble the Babylog 8000/Babylog 8000 plus/Babylog 8000 SC including the
tubing system but without the humidifier.
• Switch the device on.
• Note the software version and the operating hours down.
Communication conversion kit y/n (is displayed under the operating hour indication
after power-on).
Important : 8306065 or 8411108 (see nameplate option field) without central-alarm
function. The sockets for the communication interface may be present even if this
function is not available.
• O
2
calibration.
• Flow sensor calibration (only in the Babylog 8000).
LED and horn test (press and hold the “Reset Check” : after 2 s, each LED and the
stand-by horn are triggered.).
Important :
Alarm LEDs = 1 yellow and 2 red LEDs
Trigger LEDs = 3 yellow LEDs
Display backlight.
• Testing the keys (check respective reaction of the equipment).
Potentiometers (no fault message about potentiometer malfunction).