Dräger Babylog 8000SC, Technical & Service Manual, Page: 147 / 155

6173.3 Babylog 8000/8000 plus/8000 SC 12/00 General
Page 15
For
inter
nal use o
n
ly
. Copyr
ight r
e
se
rved.
GBK61733
X
X
T
L1.fm 07.07
.05
14 Testing the Mixer
• Carry out an O
2
calibration.
• Test set-up (see Figure below):
Fig. 9: Mixer
• Select the following inspiratory flows from the “list” menu: 1.2 / 1.3 / 1.4 / 1.5 / 1.6
/ 1.7 / 1.8 / 1.9 / 2.0 / 4 / 5 / 6 / 8 / 9 / 9.9 / 11 / 12 / 13 / 14 / 15 / 30
Allow approx. 1 min between setting and measurement of flow values (< 2 L/min). If
no values is set, the alarm “FiO
2
deviation” is allowed to occur.
15 Testing the Patient System Heating
• Put your hand against the expiratory valve block.
The temperature should exceed the room temperature.
var
5
CPAP
60
30
Flow sensor cable