manualshive.com logo in svg

Dräger 9054673, Supplement Manual, Page: 6 / 48

Share
Download
Dräger 9054673 Supplement Manual Download Page 6

Application

6

 Supplement

 

Fabius plus SW 3.n

Application

The MEDIBUS and Vitalink protocols

The following safety information has been amended:

The following safety information has been added:

Overview

Compact breathing system COSY (top view)

The following designation has changed:

WARNING

Risk of not hearing alarm signals

If the alarm volume is too low, alarm signals 

may not be heard.

– Set the alarm volume loud enough so that 

the alarm signals can be heard in the 

environment where the device is located.

– The user must remain within earshot of 

the alarm signals.

NOTE

The use of a serial interface for an analog or 

optical link and the routing of data via the 

MEDIBUS or Vitalink protocol to external 

devices, systems, or networks (LAN, WLAN, 

PDMS etc.) is the responsibility solely of the 

system manufacturer or the operating 

organization.

During operation, the alarms and indicators on 

the anesthesia workstation are binding and must 

be adhered to.

N

Connection for sample gas return line

Summary of Contents for 9054673

















































Reviews:

No comments