CONTACT US AT
www.DRpower.com
15
Installing the Pivoting Tow Hitch w/ Coupler
Tools Needed:
16mm Socket
17mm Wrench
1.
Install the Pivoting Tow Hitch (Figure 19) into the Tow Beam with the
Swivel facing upward.
2.
Install two M10 x 90mm Bolts and Spacers, with the smaller diameter
Shoulder(s) down, (Figure 20) through the Tow Bar and Pivoting Tow
Hitch. Install a Flat Washer, Lock Washer, and M10 Lock Nut on each Bolt
and tighten with a 16mm Socket while holding the Nut with a 17mm
Wrench.
Attaching the Adjustable Stabilizer Legs and Arms
Watch your feet when lowering the Stabilizer Legs.
1.
Slide the Stabilizer Legs (Figure 21) all the way into each Adjustable
Stabilizer Arms and screw in and tighten the Locking Handles (Figure 22) to
hold the Legs in place.
2.
Slide the Adjustable Stabilizer Arms all the way into the Operator Guard and
screw in two Locking Handles to hold the Arms in place (Figure 23).
3.
Loosen the Locking Handles holding up the Stabilizer Legs until they drop to
the ground and retighten them. Remove the Jack Stand from under the
Trailer.
Figure 20
M10 x 90mm Bolt(s)
and Spacers
Flat Washer(s)
Lock Washer(s)
M12 Lock Nut(s)
Pivoting Tow Hitch
Pivoting Tow Hitch
Swivel
Figure 19
Figure 21
Stabilizer Leg
Stabilizer Arm
Figure 22
Locking Handle(s)
Figure 23
Locking Handles
Summary of Contents for VERSA TRAILER PRO XL2000
Page 31: ...CONTACT US AT www DRpower com 31 Schematic DR VERSA TRAILER Dump Bed Assembly...
Page 33: ...CONTACT US AT www DRpower com 33 Schematic DR VERSA TRAILER Crane and Boom Assembly...
Page 35: ...CONTACT US AT www DRpower com 35 Schematic DR VERSA TRAILER Main Frame and Axle Assembly...