34
DR
®
LEAF & LAWN VACUUM
Converting to Flatbed Trailer Mode
Tools Needed:
•
Flat Head Screwdriver or 7mm Wrench
•
Two 3/4" Wrenches
1.
Remove the Rubber Strap from the Hose Support (
Figure 74
).
2.
Remove the Hose Support from the Bracket.
3.
Disconnect the Hose from the Impeller Housing using a Flat Head
Screwdriver or 7mm Wrench (
Figure 75
).
4.
Turn the Thumb Screw Clamp to disconnect the Hose from the Deck
Adapter (
Figure 76
).
5.
Pull the Enclosure Sleeve from the Outlet Chute (
Figure 77
).
6.
Remove the six Knob Bolts from under the Collector Base corners (
Figure
78
).
7.
Loosen the Knobs at the top corners (you do not need to remove them).
8.
With help from another person, lift the Enclosure from the Flatbed and set it
aside.
Enclosure Sleeve
Figure 77
Outlet
Chute
Hose Clamp
Figure 75
Impeller Housing
Hose Adapter
Inlet Hose
Figure 76
Deck
Adapter
Thumb Screw
Clamp
Inlet
Hose
Hose Cuff
Before performing this procedure, you must first shut off the mower and leaf
and lawn vacuum engines, wait five minutes for all parts to stop and cool, and
disconnect the spark plug wire of the leaf and lawn vacuum.
Hand Knob
with Stud
Figure 78
Front Tube
Bracket
Collector
Base
Coupling
Figure 74
Hose Support
Rubber Strap
