22
DR
®
LEAF & LAWN VACUUM
35.
Insert the end of a 40
″
Batten into the opening in the side of the top flap
corner in each side doors (
Figure 44
).
36.
Rotate the Batten up and push it down into the large pocket that runs the
length of the edge until it stops at the other end (
Figure 45
). Ensure the
upper end is fully inside the pocket. Do this on both side doors.
37.
Insert a 47
″
Batten end into the inside Pocket (inside canvas) and push it
fully into the Pocket (
Figure 46
). Close the Button Snap to secure the
Batten.
38.
Repeat the last step for the other Batten Pocket on this side and for the
two Pockets on the opposite side of the Enclosure.
39.
Install the Metal Insert into the Insert Pocket of the rear Top Door Flap
(
Figure 47
).
40.
Secure the top Door Flap to the bottom Door Flap with the Single Buckle
(
Figure 48
).
41.
Secure the Magnets of the bottom Door Flap with the Magnets of the
Upper Door Flap.
42.
Secure the side Doors together with the four Buckles (
Figure 49
).
Metal
Insert
Figure 47
Rear Top
Flap
Insert
Pocket
Batten
Figure 45
Buckles
Figure 49
Left
Side
Right
Side
Magnet
(5 Places)
Figure 48
Buckle
Batten
Figure 44
Batten Access
Opening
Batten
Pocket
Batten
Inside
Batten
Pockets
Button
Snap
Figure 46
