CONTACT US AT
www.DRpower.com
19
16.
Insert the two ends of the left side Collector Tube into the holes at the
corners of the Collector Base (
Figure 26
).
17.
Secure the rear Tube Brackets to the Collector Base with one Hand Knob for
each Bracket (
Figure 27
). Do not fully tighten.
18.
Secure the front Tube Brackets to the Collector Base with two Hand Knobs
for each Bracket (
Figure 28
). Do not fully tighten.
19.
Install the top front Tube Frame to the side Tube Frames and secure with
two C-Head Bolts and Threaded Hand Knobs (
Figure 29
).
20.
Slide the top rear Tube Frame through the Enclosure Loop and secure to the
Side Tube Frames with two C-Head Bolts and Threaded Hand Knobs (
Figure
30
).
Note:
The Top Rear Tube Frame is crimped on both ends. The ends that are
crimped create a flat that is offset from the round tube. Install with the offset
facing out towards the back so the Top Rear Tube Frame and the tube at the
rear of the Collector Tube are aligned and relatively flush with each other.
Top Rear
Tube Frame
Figure 30
Top Rear
Loop
Rear Door
Flap
Hand
Knob
with
Threads
C-Head
Bolt
Tube Offset
Facing out
Top Front
Tube Frame
Figure 29
Hand
Knob with
Threads
C-Head
Bolts
Bracket
Hand Knob
with Stud
Figure 28
Front Tube
Bracket
Collector
Base
Hand Knob
with Stud
Figure 27
Rear Tube
Bracket
Collector
Base
Left Side Tubes
Figure 26
