13
EN
Fitting the
C
uff
1. Plug the cuff connector to the cuff socket on the
device left side.
2. Stretch your left (right) arm in front of you with
your palm facing up. Slide and place the cuff
onto your arm to let the air tube and artery mark
region toward the lower arm. Wrap and tighten
the cuff above your elbow. The artery mark on
the edge of the cuff should be approx. 0.8ʺ to
1.2ʺ (2 cm to 3 cm) above your elbow. Align the
tube over the main arteries on the inside.
3. Leave a little free space between the arm and
the cuff: you should be able to fit two fingers
between them. Remove all clothing covering or
constricting the measurement arm.
4. Press the hook material firmly against the pile
material. The top and bottom edges of the cuff
should be tightened evenly around your upper
arm.
measuring
P
rocedure
always apply the pressure cuff before turning on the monitor.
1. Press ON/OFF button. All icons appear two seconds on DISPLAY, then
switch to measurement, and display “0” or last measurement record.
2. Pump begins to inflate the cuff. The heart symbol « » is shown on the
display. When complete, the results will be displayed.
Arm cuff
(2-3) cm
Hose
Constriction of
the upper arm
