12
2. Plug the AC adaptor into a 220/110 V power socket. The device is ready
for measurement.
3. Test that power is available by pressing the ON/OFF button.
note:
• Please use the AC adaptor of Trademark
Dr. Frei
®
. Any other adaptor
being used, the service center is not considered responsible for the
warranty servicing/repair of the monitor.
• No power is taken from the batteries while the AC/DC adaptor is con-
nected to the device.
• Please consult service center if you have questions relating to the AC/
DC adaptor.
Cuff Connection
Insert the cuff connector into the
opening provided on the side
of the device as shown in the
picture.
MEASUREMENT PROCEDURE
ATTENTION
• Find time to relax by sitting in a quiet atmosphere for some time before
measurement.
• Efforts by the patient to support the arm can increase the blood pres-
sure. Make sure you are in a comfortable, relaxed position and do not
flex the arm during measurement.
• Always measure on the same arm (normally left).
• Remove any garment that fits closely to your upper arm. Do not roll the
sleeve since it can squeeze your hand and this can lead to false results.
• Use only clinically approved original cuff.
• If you want to follow the results of your blood pressure measurements,
always perform measurements at the same time of day, since blood
pressure changes during the course of the day.
• Measurements should be done after a 5 minute rest to ensure accuracy.