18
Remote Power Switch Web Browser
9
The Remote Power Switch (AC) features a built-in Web
Browser Interface that allows you to configure the unit
through the Internet or your Intranet. You can quickly
issue controls using most commonly used browsers.
NOTE
:
Max number of users allowed to
simultaneously access the Remote Power Switch (AC)
via the Web is 4.
Logging on to the Unit
9.1
For Web Interface functionality, the unit must first be configured with some basic network information. If
this step has not been done, refer to the section "Quick Start: How to Connect to the Remote Power
Switch (AC)" for instructions on initial configuration setup.
1. To connect to the Remote Power Switch (AC) from your Web browser, enter its IP address in the
address bar of your web browser. It may be helpful to bookmark the logon page to avoid entering this
each time.
2. After connecting to the unit's IP address, enter your login information and click OK.
NOTE:
The
factory default username is "
admin
" and the password is "
dpstelecom
".
3. In the left frame you will see the
Monitor
menu (blue) and
Edit
menu (green) The Monitor menu
links are used to view the current status of alarms. The Edit menu is used to change the unit's
configuration settings. All the software configuration will occur in the
Edit
menu. The following
sections provide detailed information regarding these functions.
Fig. 9.1
- Enter your password to enter the Remote Power Switch (AC) Web Browser Interface