12
Circuit Breaker
6.4
The 1x8 Remote Power Switch has its circuit breaker located on the front of the unit controlling the units
input power. It is rated to protect your equipment from 100V to 240V with a current of 20Amps max. The
2x3 Remote Power Switch has two circuit breakers located in the front independently controlling power
inputs A and B.
Quick Start: How to Connect to the Remote Power
Switch
7
Use the following instructions to give the unit an IP address, subnet and gateway through the front craft
port (TTY interface) to start. Once these settings are saved and you reboot the unit, you can access it
over LAN to perform the rest of your changes via the Web Browser interface.
NOTE
: Use included DB9
craft port.
DPS Part # D-PR-045-10A-04
.
Alternative option:
You can skip the TTY interface by using a LAN crossover cable directly from your
PC to the Remote Power Switch (AC) and access its Web Browser.
...via Craft Port (using TTY Interface)
7.1
1. The simplest way to connect to the Remote Power Switch (AC) is over a physical cable
connection between your PC's COM port and the unit's craft port.
Note:
You must be connected
via craft port or Telnet to use the TTY interface. Make sure you are using the straight through (1 to
1) Male to Female DB9-DB9 download cable provided with your Remote Pow er Switch (AC) to
make a craft port connection. We'll be using HyperTerminal to connect to the unit in the following
example - however, most terminal-emulating programs should work.
To access HyperTerminal using Windows:
2. Click on the
Start
menu
>
select
Programs
>
Accessories
>
Communications
>
HyperTerminal.