13
3. At the Connection Description screen, enter a
name for this connection. You may also select an
icon. The name and icon do not affect your ability
to connect to the unit.
4. At the Connect To screen, select Com port
you'll be using from the drop down and click
OK. (COM1 is the most commonly used.)
5. Select the following COM port options:
• Bits per second: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control:
None
Once connected, you will see a blank
HyperTerminal screen. Press Enter to activate.
6. When prompted, enter the default user
name
admin
and password
dpstelecom
.
NOTE
:
If you don't receive a prompt for your
user name and password, check the Com port
you are using on your PC and make sure you
are using the cable provided.
Additional cables can be ordered from DPS
Telecom:
Part number
D-PR-045-10A-04