DPS Telecom D-PK-NG224-12003 User Manual Download

Page: 80 / 80

(800) 622-3314 • www.dpstele.com • 4955 E. Yale Avenue, Fresno, California 93727

Free Tech Support is Only a Click Away

Free Tech Support in Your Email: The Protocol Alarm Monitoring Ezine

The Protocol Alarm Monitoring Ezine is your free email
tech support alert, delivered directly to your in-box
every two weeks. Every issue has news you can use
right away:

Free Tech Support on the Web: MyDPS

MyDPS is your personalized, members-only online resource.
Registering for MyDPS is fast, free, and gives you exclusive
access to:

•    Firmware and software downloads and upgrades
•    Product manuals
•    Product datasheets
•    Exclusive user forms

Expert tips on using your alarm monitoring
equipment — advanced techniques that will save
you hours of work

Educational White Papers deliver fast informal
tutorials on SNMP, ASCII processing, TL1 and
other alarm monitoring technologies

New product and upgrade announcements keep
you up to date with the latest technology

Exclusive access to special offers for DPS
Telecom Factory Training, product upgrade offers
and discounts

To get your free subscription to
The Protocol register online at

•

Need help with your alarm monitoring? DPS Information Services are ready to
serve you … in your email or over the Web!

www.DpsTelecom.com

www.TheProtocol.com/register

www.DpsTelecom.com/register

Register for MyDPS online at

Summary of Contents for D-PK-NG224-12003

















































































Search results

Summary of Contents for D-PK-NG224-12003

Reviews:

Related manuals for D-PK-NG224-12003

Brands by name

Popular brands

DPS Telecom D-PK-NG224-12003, User Manual

Search results

Summary of Contents for D-PK-NG224-12003

Reviews:

Related manuals for D-PK-NG224-12003

Brands by name

Popular brands