DPL Pool Equipment 100 HPRA-410, Owner'S Manual

Page: 9 / 26

Pool Heat Pump _8
POOL HEAT PUMP INSTALLATION
Determining Optimum Location
Choose a location where the noise of the heat pump, when running, and the discharged air will not disturb the neighbours.
Install the Pool Heat Pump Heater unit on a flat, stable surface that can support its weight and does not generate any un-
necessary noise and vibration.
Clearance
Choosing the location of your heat pump is very important. You should install it as close as possible to the filter system.
You should obey the clearance distances around the heat pump that are given in the drawing below.
Level Placement
We recommend that you install your heat pump on a solid base, for example two concrete tiles. Four (4) rubber pads (ab-
sorbent pads) are provided to lessen the transfer of vibrations. (See drawing below.)
60 cm (24 in) or more
(Front)
30 cm (12 in) or more
60 cm (24 in) or more
30 cm (12 in) or more
40 cm (16 in) or more
A: Concrete tile
A
A
(Front)
(Top)
(Side)
(Side)