DPL Pool Equipment 100 HPRA-410, Owner'S Manual

Page: 23 / 26

Pool Heat Pump _22
TEMPERATURE CONTROLLER PROGRAMMING
Warning: Please do not modify the parameters in the temperature controller programming without a valid reason.
To access the temperature controller programming mode, you must simultaneously press and hold the and
buttons for five (5) seconds. The indicator will then light up and the ‘’F0~F8’’ code will be displayed.
To select a function (F0~F8), you must press on the or buttons.
Once the function is selected, you must press the button to modify the default value.
To modify the default value, press the or buttons.
Once the default value is modified, press the button to return to the previous step in order to select another function
(F0~F8).
To exit the temperature programming mode, press and hold the button for a few seconds.
See the chart below for a description of all functions.
Warning :
The modification of the default values can affect the proper functioning of the heat pump. The default values must never be
modified without authorization from your dealer.
FUNCTION
Return difference
Compressor delay time
Minimum adjustment of the water
temperature
Maximum adjustment of the water tem-
perature
Mode
Sensor calibration
Start defrost setting value
End defrost setting value
Minimun working temperature
SETTING RANGE
1~15°C (34~59°F)
0~9 minutes
-10°C -Setting temperature
Setting temperature -60 °C
1: Refrigeration 2: Heating 3: Alarm
-5~5°C (23~41°F)
-10~0°C (14~32°F)
0~10°C (32~50°F)
-10-5°C
CODE
F0
F1
F2
F3
F4
F5
F6
F7
F8
DEFAULT VALUE
1°C (34°F)
5 minutes
16°C (61°F)
35°C (95°F)
2
0
-3°C (27°F)
6°C (43°F)
-5°C