DPL Pool Equipment 100 HPRA-410, Owner'S Manual

Page: 12 / 26

> A qualified person must install the unit in accordance with all federal, provincial and local codes and guidelines.
> An electrical circuit exclusive to the heat pump must be used as the power supply.
> The supply voltage, size of over-current protective device, and size of supply conductors for the heat pump
are shown below.
> The Pool Heat Pump condensing unit must be connected to a properly grounded electrical supply.
You must ensure this unit is properly grounded.
> Check local electrical codes and regulations before obtaining wire.
> Use copper supply wires only.
> Please use conductors suitable for at least 75
℃
for 100HPRA-410 model.
Pool Heat Pump _11
ELECTRICAL SPECIFICATIONS
50HPRA-410 80HPRA-410 100HPRA-410
13.1
14.5 28.3 37.5
17.5 35.6 38.3
26.9
145 145
29
Maximum over-current protection
Electrical Specifications