DPL Pool Equipment 100 HPRA-410, Owner'S Manual

Page: 13 / 26

Pool Heat Pump _12
CONNECTING ELECTRICAL CONDUCTORS
You must remove the electrical connection box cover to access the electrical compartment. Wiring connections must be
made exactly as shown in the wiring diagram found under the top cover inside inside the Pool Heat Pump.
A disconnect switch must be installed near the outdoor unit for easy disconnection of power to the Pool Heat Pump.
CAUTION
Operating the unit with improper line voltages constitutes abuse and will affect unit reliability and operation. Do not install
a system where voltage or phase imbalances may occur above or below permissible limits.
WARNING
Disengage main power disconnect before attempting installation
A: Disconnect switch
B: Electrical conductor
C: Electrical connection box cover
D: Terminal block
A
B
D
C