English
English –
25
Type
Technology adopted
Lamp
Power input
Ambient operating temperature
Use in acid, saline or potentially
explosive atmospheres
Mounting
Protection rating
Dimensions / weight
FL100 signalling light (optional)
Flashing indicator light for automatic gate and door automations
The device incorporates a receiving antenna for remote control
Illuminating indicator with 12V 21W lamp, controlled by the control units for automation supplied
by Mhouse
12V 21W BA15 fitting (self-moving lamp type)
The device may only be connected to the “FLASH” and “ANTENNA” terminals on Mhouse auto-
mation control units.
-20 ÷ 50°C
No
Horizontal on the ground or vertical on the wall
IP55
120 x 60 h 170mm / 285g
PH100 photocells (optional)
Type
Technology adopted
Detection capacity
TX transmission angle
RX reception angle
Useful range
Power supply/output
Absorbed power
Maximum cable length
Addressing capability
Ambient operating temperature
Use in acid, saline or potentially
explosive atmospheres
Mounting
Protection rating
Dimensions / weight
Presence detector for automation of automatic gates and doors (type D in accordance with EN
12453) made up of a pair of a transmitter “TX” and a receiver “RX”
Optical, via direct TX-RX interpolation with modulated infrared beam
Opaque objects placed on the optical axis between TX-RX with dimensions greater than 50mm
and a speed of below 1.6 m/s
approx. 20°
approx. 20°
Up to 10m for maximum ± 5° TX-RX offset (the device can signal an obstacle even in the event of
particularly adverse weather conditions)
The device can be connected only to “ECSBus” networks, from which it obtains electrical power
and sends the output signals
1 ECSBus unit
Up to 20 m (observe the warnings regarding minimum gauge and type of cables)
Up to 6 detectors with security features and 2 to control the open command
Automatic synchronisation avoids interference between the various detectors
-20 ÷ 50°C
No
Vertical, wall-mounted
IP44
64 x 89.2 h 29 mm / 60 g
