English
English –
23
LED P2 [E]
Off
*
On
1 flash per second
2 flashes per second
Status
All OK
All OK
The device recognition phase has not been
carried out, or there are errors in the data
saved
Devices recognition phase in progress
Action
“Slow” speed selected
“Fast” speed selected
It is possible that there are faulty devices. Check and if neces-
sary repeat the device recognition phase (see paragraph 10.3.3
“Recognition of other devices”)
Indicates that it is in the process of recognising the attached
devices (this will take a maximum of a few seconds)
LED P3 [F]
Off
*
On
1 flash per second
2 flashes per second
Status
All OK
All OK
There is no memorised opening angle
Opening angles auto-recognition phase in
progress
Action
Cycle operation
Complete cycle operation
Carry out the recognition phase (see chapter “3.5.2 - Leaf open
and closure angles recognition”).
Indicates that the open angles self-learning phase is in progress.
*
or it could be in “Standby” mode
LED P1 [D]
Off
*
On
Series of quick flashes,
from 1 to 4
5 quick flashes
1 slow flash
3 slow flashes
5 slow flashes
Status
All OK
Memorisation in Mode 1
Memorisation in Mode 2
Cancellation OK
Wrong command
Memorisation OK
Cancellation OK
Action
No memorisation in progress.
During memorisation in mode 1, it is normal for it to take a maxi-
mum of 10 s.
During memorisation in mode 2, it is normal for it to take a maxi-
mum of 10 s.
Completion of deletion of a transmitter.
A command has been received from an unmemorised transmitter
Memorisation completed successfully
Completion of deletion of all transmitters.
D
E
F
C
B
A
41
