Rack Monitor 8800E/8801E
Document: Operation Manual
Date: 16-Jun-2011
Version: A.6
Page 33 of 35 H71343
Annex A – Additional Electrical Drawings
Annex B - Recommended Spare Parts
With the purchase of the Rack Monitor the
OPW Fluid Transfer Group Europe BV
recommends some spare parts
to be purchased. Although this Rack Monitor 8800E/8801E is designed with solid state lamps and a minimum
maintenance spare parts are available. When parts are replaced, it is recommended to replace them with the
original parts.
When using the Rack Monitor 8800E/8801E for its intended use and the normal environments these spare parts will
be useful at the end of the lifecycle of the given parts, but they have been known to be necessary to resume
working swiftly after replacing these parts.
The recommended spare parts are:
Part number
Description
Quantity
H71197
Main Seal
1
H71307
Corrosion Protector VCI-101/ACF-50
1
EL04141
Mains power input Fuse 2AT
1
EL04142
Relay contact output Fuses 5AT
1
The following parts are also available:
Part number
Description
Quantity
EL04139
Liquid Crystal Display cable assembly
1
EL00203-CRK
Internally used connector kit
1
BCU-BLUE
Blue Function key (low level)
1
BCU-RED
Red Function key (high level)
1
EL06802
SD-Ram Card
1
8800-BRK
Fastener kit 12x Door Bolts
1
H71342
Installation manual
1
EL05104
Cable gland M20x1,5 Ø cable diameter 10-14mm ATEX-Ex/d (not armed)
1
EL05134
Cable gland M20x1,5 Ø cable diameter 3.1-8.6mm ATEX-Ex/d (not armed)
1
7400E
Black Plug and 10-conductor individual screened coiled cable.
1