background image

TROUBLESHOOTING CARTRIDGE FILTERS

PROBLEM

POSSIBLE CAUSE

REMEDIES

1 - High gauge pressure,

1 - Cartridge contaminated with

1 - Clean cartridges.

      low return flow.

suspended solids.

2 - Chemically shock pool with

2 - Algae growth on cartridge cloth.

chlorine or clean cartridges.

3 - Calcium crustation on cartridge

3 - Solution clean cartridges with mur-

cloth.

iatic acid, refer to “Hard Water”.

2 - Very high pressure, no return

1 - Cartridge cloth completely

1 - Clean cartridges.

  flow

clogged with suspended solids
or algae growth.

3 - Low  gauge pressure, low return

1 - Skimmer or pump strainer baskets

1 - Clean out baskets.

     flow, bubbles returning to pool.

clogged and restricting flow.

2 - Fill pool to proper level.

2 - Pool water level low, pump

3  - Firmly secure pump strainer lid.

drawing in air.

4 - Replace hose or tighten all

3 - Pump strainer lid not firmly

suction connections.

secured.

5  - Replace vacuum hose to a larger

4  - Crack in suction hose or loose

diameter and smooth inside.

connection.

6  - Remove restriction.

5 - Vacuum hose too small in

diameter.

6 - Vacuum cleaner clogged with

debris.

4 - High return flow, low gauge

1 - Opening in cartridge cloth.

1  - Replace cartridge.

     pressure. Pool water won’t clear . 2 - Cartridge not seated inside filter.

2 - Reassemble cartridges inside

  up.

3  - Pool water chemically out of

filter.

balance.

3 - Chemically treat and balance

pool water condition.

5 - Short filter cycles.

1 - Cartridges clogged with

1  - Clean cartridges.

contaminants or algae.

2  - Clean cartridges, (Refer to “Hard

2 - Calcium crustation on cartridge

Water”).

cloth.

3  - Chemically treat and balance

3 - Vacuuming large amounts of

pool water condition.

sediments from pool floor.

6 - No gauge pressure, low or no

1 - Pump impeller plugged with

1 - Service pump to remove

     flow, pump running OK.

debris or  impeller threads are

 obstruction or replace impeller.

stripped.

2  - Clean out baskets.

2 - Skimmer or pump basket clogged.

7 - Debris flowing into pool from

1  - Opening in cartridge cloth.

1 - Replace cartridge.

      return inlet.

2 - Cartridge not seated properly.

2 - Reassemble cartridges inside

filter.

Note: Contact your pool dealer for any problems you cannot solve.

Change of Design:  Doughboy Recreational expressly reserves the right to change or modify the design
and construction of any product in due course of our manufacturing procedures, without incurring any
obligation or liability to furnish or install such changes or modifications on products previously or
subsequently sold.

“the original portable pool”

®

DOUGHBOY RECREATIONAL • 

10959 Jersey Blvd., • Rancho Cucamonga, CA  91730-5194

DB 1197-013

Made in the United States of America

Copyright © 1997

PREVENT

DROWNING

Watch children
   at all times.

        You can be
 permanently injured.

Shallow water.

WARNING 

Do not remove or cover.

 

RESCUE:

NO DIVING!

Summary of Contents for 0-1802-019













Reviews: