dotykacka DOTPO0501, Quick Manual

Page: 52 / 122

V
52
en
1.3 Inserting paper into the printer
1. Open the printer cover by pulling the cover
(1)
upwards.
2. Insert the properly orientated roll of thermal paper and make sure
the paper end passes between the cutting machine and the rub-
ber roll on the upper cover side.
3. Close the print cover and click it into place.
If the thermal paper is inserted and the printer does not print, check
whether the paper is properly inserted and orientated. The thermal
layer must face out of the printer towards the display