Doro 130R, Manual

Page: 5 / 36

English
www.doro.com
Installation
Unpacking
The package contains:
- Handset - Mains adapter
- Base unit - Line cord
- 2 batteries
Models with an extra handset (e.g. +1) also include an additional handset, batteries, charger and
mains adapter.
IMPORTANT!
Only use with the supplied power adapter/s.
Connection
1.
Connect the mains adapter to the socket on the base unit and to an electrical wall socket.
2.
Carefully remove the battery cover from the back of the handset. Insert the batteries into
the handset and ensure correct battery polarity is observed, replace the battery cover.
3. Place the handset in the base unit, with the keypad facing outwards. Once the handset is
correctly positioned in the base unit, a beep will be heard.
4. Leave the handset to charge initially for 24 hours before use.
5.
Connect the line cord to the telephone plug and the socket on the base unit.
Only for models with an extra handset (+1...):
6.
Connect the additional charger’s mains adapter to the socket on the charger and to an
electrical wall socket.
7. Carefully remove the battery cover from the back of the handset. Insert the batteries into
the handset and ensure correct battery polarity is observed, replace the battery cover.
8. Put the additional handset in the charger, with the keypad facing outwards.
9.
Leave the handset to charge initially for 24 hours before use.
Please note!
The earpiece of the handset may attract small metal objects such as staples and pins. Care should be
taken when placing the handset near these items.
Under power failure conditions this telephone will not operate. Please ensure that a separate telephone
not dependent on local power is available for emergency use. Do not place the base unit close to other
equipment such as TV sets, computer screens, telecom equipment, fans, on Granite bench tops etc. This
will minimise the risk of interference. Do not place the base unit in areas where it will be exposed to
direct sunlight or other major heat sources. Only use with the supplied power adapter/s.
New Zealand Purchasers
Before use please change the Recall (R) button timing to setting 600ms as described
on page 21. This will ensure correct operation of additional network services such as
”Call Waiting”.