Doro 130R, Manual

Page: 33 / 36

English
www.doro.com 33
Other
The answering machine is not answering
- Memory may be full. Listen to your messages and erase them.
- Check that the unit is switched on.
- Check that the telephone cable and the mains adapter are correctly
connected.
The answering machine does not respond to remote control
- Check that the telephone you are using to remotely control the answering
machine is a tone dialling telephone.
- Some telephones only emit a short tone beep when buttons are pressed,
and this may not be enough to activate remote control Use a separate tone
transmitter in these cases.
- Also try holding the buttons down longer, approximately 1 second per
digit.
If the telephone still does not work, contact your local Doro Support
department or the place of purchase. Don’t forget the receipt or copy of the
invoice.