Doro 130R, Manual

Page: 25 / 36

English
www.doro.com 2
The answering machine (130R)
About the answering machine
The answering machine has to be turned on in order to receive messages. On
incoming calls the answering machine will respond after the selected number of
rings (please refer to page 30).
When the answering machine answers the incoming call the caller will hear
your outgoing message (OGM) followed by a tone, at this point they can leave a
incoming message (ICM) up to 3 minutes in length (user selectable). Should the
caller exceed this limit the call will be terminated. The memory can store up to 15
minutes of incoming messages.
If the answer function is set to Answer only (ANNC ONLY) the caller will not be
able to leave a message, as the call will be disconnected once the outgoing message
has been played.
Outgoing Message (OGM)
The OGM is your announcement to the caller and may be up to 1 minute in length.
If you choose not to record your own OGM, the caller will hear a prerecorded
OGM. Use your OGM to advise the caller to begin talking after a beep is heard. For
example: “Hello, we are unable to take your call right now, please leave a message
after the beep, and we’ll return your call as soon as possible. Thank you for calling.”
There are two separate OGM messages: one for Announcement only (OGM 2)
where a caller cannot leave a message(see page 29), and one for normal answering
operation (OGM 1).
Recording your OGM
1. Press
R
.
2.
The total number of (new) recorded ICM’s will now be announced (if any), listen
to them or press
C C
to get to the menu for answering machine.
3.
Scroll
{
/
}
to ANS SETUP. Press
OK
.
4.
Scroll
{
/
}
to OGM 1. Press
OK
.
5. Scroll
{
/
}
to REC OGM 1. Press OK .
6. Record your OGM. Please speak 30 cm from the handset.
7.
Press
5
to stop recording.
8. Your OGM will be repeated after a few seconds. Repeat the same procedure if
you wish to change the OGM. Any old OGM will automatically be erased when
a new one is recorded.
9.
Press
q
to exit the Menu system.
Checking your OGM
Please use above sequence, but select "PLAY OGM 1" instead of "REC OGM 1".