Page 9
MotoGP™ Game Software copyright 2015 PlayMechanix™ Inc. All rights reserved.
Setup Motorcycle Base
1.
Check for shipping damage to the following:
Motorcycle decals
Seat assembly
Handlebars
Buttons
Brake lever
2.
Position motorcycle base in front of main cabinet
3.
Slide motorcycle base blind-mate connector into main cabinet
4.
Secure motorcycle base to main cabinet using four ¼-20x2” screws, four flat washers, and four
lock washers.
5.
Ensure the motorcycle base is level, stable, and flush with main cabinet.
With at least one assistant, adjust the leg levelers.
6.
Tighten the 4 screws firmly.
7.
Remove the two 3/8-16 x 2” shipping bolts from the bike frame base. There is a bolt on either
side of the bike frame base. These prevent the bike seat from moving during shipment.
For
proper setup and game play, these must be removed in order to allow the bike seat to lean left
and right.