CoinUp®
Copyright © 2015 Play Mechanix™ Inc. All rights reserved.
Page 36
Network Configuration
Wired Connection – Ethernet Cable
1.
Set up DSL or cable modem service through an ISP for online play or setup a local network.
2.
Turn off AC power, unplug the power cord, and open the back door.
3.
Run the Ethernet cable to the cabinet.
4.
Route the Ethernet cable through the mouse hole in the back door.
5.
Inside the cabinet, dress the Ethernet cable away from other cables and metallic parts.
6.
Connect the Ethernet cable to the RJ45 jack on the PC.
7.
Close the back door.
8.
Plug in power cord and turn on AC power.
Connection Wizard
The connection wizard provides a step-by-step guide to configuring an internet connection.
Select a connection type and follow the on screen instructions.
Online Configuration
Dynamic will automatically try to assign an IP address to the game machine
Static allows the game machine to be set with a fixed IP address
Local Configuration
Configures the game to connect to other units on a local area network
Checking the Connection
1.
Enter Diagnostic mode by pressing the TEST service button.
2.
Select Online then select Connection Details and Test.
3.
Execute Test Connection to verify:
•
It can obtain a valid IP address.
•
It can contact the CoinUp® server.
•
It can access the CoinUp® database.
•
It can access the CoinUp® file server.
4.
The test results section reports: SUCCESS or FAILURE.
If any ping results in FAILURE, see the Troubleshooting chapter or call your distributor.
Game Registration
After the first reboot with a network connection, you will be prompted to register your location. You can
also register by entering the Diagnostic menu, select Online, then select Cabinet Location/Registration.
1.
Login by swiping operator card or manually with operator id and pin.
2.
Set Cabinet Location screen appears, downloading locations from CoinUp® automatically.
3.
Scroll through the list and highlight the appropriate location.
4.
Select a location to continue.
5.
After location is chosen, a confirmation screen is displayed.
6.
Select Use this Location to continue.
7.
If the location is not on the list, select Add New Location to continue.
8.
When adding a new location, follow step-by-step instructions to provide needed information.
