Setup
Copyright © 2015 Play Mechanix™ Inc. All rights reserved.
Page 6
Unpack Carton
1.
Place the shipping crate on a flat stable surface.
2.
Cut the banding straps and remove the cardboard lid.
3.
Lift off the large cardboard container surrounding the cabinet and any shipping cleats.
4.
With at least two people and a dolly, remove the cabinet from the shipping pallet.
5.
Remove the coin door key from the coin return chute.
6.
Open the top coin door.
7.
Locate the key for the bottom access panel and the cash box.
Setup Main Cabinet
1.
Using a wheeled cart and at least one assistant, transport the cabinet to a suitable playing area.
2.
Ensure the main cabinet is level and stable.
With at least one assistant, adjust the leg levelers.
3.
Check the AC line cord for visible signs of damage.
Pay particular attention to the plug and line cord insulation.
4.
Check for shipping damage to the following:
Cabinet Marquee, Cabinet back door, Cabinet coin door, Cabinet decals, Monitor
Install Lower Dash Components
1.
Locate dashboard left, right, and center vacform components.
2.
Secure vacforms to the center of the dashboard using eight #10-32 x 1-1/4 inch torx screws,
eight #10 lock washers, and eight #10 flat washers.
3.
Secure left and right vacforms to the bottom of the dashboard using four #10-32 torx screws,
four #10 lock washers, and four #10 flat washers.
