C. Basic Use
Check Buckle
Position
Determine which of the
available buckle positions
will provide a snug fit for
your child.
You
MUST
use the 1st or 2nd buckle strap slots
when rear facing. Any slot can be used for forward
facing.
13
14
From the top, pull buckle
free from shell and pad.
Insert the buckle’s
metal retainer through
the desired slot.
Make sure that the
buckle is
facing out.
Failure to place buckle’s metal retainer
completely through pad and shell can result
in serious injury or death.
b.
c.
continued on next page
Rotate metal retainer, then
insert retainer up through
the shell and pad.
a.
To Change Buckle
Position
Turn the child restraint over
and locate buckle’s metal
retainer on bottom of shell.
Pull buckle’s metal
retainer
completely
through pad and shell
.
Pull up on buckle to
make sure it is secured.
The buckle must not
pull out.
d.
f.
8.
9.
1
2
3
Unbuckle Harness
Press red button. Pull
buckle tongues out. Place
harness straps out of the
way.
6.
Place Child in Child
Restraint
Place the child’s bottom
and back flat against the
restraint.
This will allow the harness
straps to be properly
tightened.
7.
Release Chest Clip
Press on chest clip release
button and pull apart.
5.
