23
C. Basic Use
24
C-6
Installing Harness System
Install Buckle
Insert the buckle’s metal
retainer through the
desired slot. Make sure
that the buckle is
facing
out.
You
MUST
use the 1st
or 2nd buckle strap slots when rear facing. Any slot
can be used for forward facing.
Pull buckle’s metal retainer
completely through pad
and shell
.
Check Buckle
Pull up on buckle to make
sure it is secured.
The buckle must not pull
out.
b.
Thread Harness’s Metal
Retainer Into Shell
Push the harness’s metal
retaining into the lower
harness slot making sure it
goes
completely through
the pad and shell.
2.
Lock Harness’s Metal
Retainer
Rotate the shell over to
expose the bottom of
shell. Pull on the harness
straps to lock the metal
retainer into place.
3.
Attach Harness
Strap to Splitter
Plate
From the bottom of the
child restraint, fit the
harness strap loops
onto the splitter plate.
The sewn end of
the harness strap
loops MUST face towards you. DO NOT twist harness
straps or harness tightening strap and make sure the
harness straps are COMPLETELY ON the splitter plate.
Harness system must be reattached
correctly.
Failure to follow these warnings can result
in serious injury or death.
Thread Harness
Strap
Push harness strap ends
through upper harness
slots at the same height.
4.
Failure to place buckle’s metal retainer
completely through pad and shell can result
in serious injury or death.
5.
1.
a.
1
2
3
