36
35
E. Installing Rear Facing
Check Belt Tightness
Grasp the child restraint
at
the belt path
with one hand.
Push and pull the child
restraint from side to side,
forward and back. The child
restraint should not move
more than 1 in (2.5 cm).
NOTE:
If it moves more
than 1 in (2.5 cm), try
reinstalling the child
restraint or try another
seating location.
Secure your child in the
child restraint.
Recheck the recline
angle to make sure it
is reclined according
to your child’s weight.
Repeat steps if not
reclined correctly.
5.
Rear-Facing
For Children 5-22
(2.3-10 kg)
Top Line MUST Be
Level with the Ground.
Rear-Facing
For Children 22-40 lbs
(10.1-18 kg) AND can sit
up unassisted
Recline range is between
the 2 level to ground
lines.
Review instruction manual
.
4360-2154
To Remove LATCH Belt
From Vehicle Anchor
Remove child from child
restraint. Press down firmly
on adjuster side of child
restraint and press release
button to release tension.
Unhook LATCH from anchor
bar by squeezing spring
lever and twist hook.
It may be easier to tighten the
LATCH belt through the belt
path opening as shown.
E-4
Installing Rear Facing with
Vehicle Belts
Do not use the LATCH along with the vehicle
lap or lap/shoulder belt. Store LATCH belt
when using the vehicle belts.
Check the vehicle belt before each use. Use
only if the belt is tightened properly and
securely.
Attach the tether hook to the storage location
on back of chld restraint when used rear
facing.
Failure to follow these warnings can result in
serious injury or death.
Store LATCH
1.
NOTE:
Review section D-4 to determine what kind of vehicle
belts you have. Review your vehicle owner’s manual for
vehicle seat belt use.
Store Tether
2.
continued on next page
