41
42
F. Installing Forward Facing
The tether is used for the forward-facing position only.
NOTE:
We strongly recommend that you use the tether in
the forward-facing position. If your vehicle does not have
an anchor bracket, please see your dealer or a qualified
mechanic and have one installed. The tether can greatly
improve the performance of this child restraint.
Storage of Top Anchorage Strap (Tether):
When the tether is not in
use, attach the tether hook
to the storage location on
back of child restraint as
shown. Gently tighten tether
to remove the slack.
F-2
Adjusting Top Anchorage Strap
(Tether)
Lift up to
loosen
To loosen;
Lift up on top
anchorage lock and push
lock adjuster toward tether
hook.
To tighten;
After the
child restraint is locked
into place with LATCH or
vehicle belt, push down on
child restraint and pull on
free end of tether.
Pull loose
end to
tighten
To Adjust Top Anchorage Strap (tether):
F-3
Preparing to Install
LATCH Forward Facing
Routing LATCH Belt
Insert the LATCH hook
with
the adjuster closest
to it, through the
forward-facing belt path.
1.
Thread LATCH Across
Pull the LATCH hook
across the back and out
the other side as shown.
Make sure the belt is not
twisted.
2.
NOTE:
Pull the LATCH belt out of the rear-facing belt path if you
have used this child restraint rear facing.
Adjuster