Doosan BALLOON LIGHT LED 6x100W, Operation & Maintenance Manual

Page: 4 / 36

BL600 LED Operation & Maintenance Manual 4
MINIMUM DISTANCES NEAR HIGH-VOLTAGE LINES
KEEP THESE INSTRUCTIONS WITH YOUR PRODUCT
PRECAUTIONARY PRINCIPLES TO
RESPECT TO MAINTAIN YOUR PRODUCT
WARRANTY
1. Use the included glove when handling lamps to
prevent potential damage caused by the transfer of
oils and dirt to glass.
2. Always disconnect the power before performing a
service.
3. Do not operate your Balloon Light without its
envelope, or with a damaged envelope.
4. Protect the envelope by operating away from walls,
projectiles, electric wires, trees, animals, etc.
5. DO NOT LEAVE A DEFLATED ENVELOPE
UNCOVERED WHEN NOT IN USE.
6. Always use the included protective cover when
storing your Balloon Light. Failure to do so may result
in loss of warranty coverage.
7. Store your Balloon Light in a dry, ventilated area away
from heat sources and chemical products.
8. Be sure that envelope is completely dry before
installing the protective cover.
9. Do not use chemical solvents to clean the envelope.
Use mild soap and water as necessary.
10. Do not modify the electrical components or unit
structure.
11. Do not operate your Balloon Light if the cable is
damaged, twisted, or tangled.
12. Care must be taken to always operate the product
with a filter as clean as possible and not clogged. The
change in color or in appearance of the filter indicates
that it requires cleaning. A poor air intake results in
the overheating of the product that may cause a life
term reduction of certain components or their
destruction.
13. Care must be taken when handling the product stored
in its original packaging (incorporating its
reinforcements). Be careful not to drop the product
under its own weight when loading or unloading. A
damaged or eviscerated container will not protect the
product correctly anymore and must be replaced.
FAILURE TO COMPLY WITH ONE OR MORE OF
THESE RECOMMENDATIONS WILL LEAD TO LOSS
OF THE PRODUCT WARRANTY.